manualshive.com logo in svg

Silvercrest KH2150, Operating Instructions Manual

Share
Download
Silvercrest KH2150 Operating Instructions Manual Download Page 14

VOL/MUTE SET

Set the volume control for each individual device.
1. Hold the 

S

button (5) pressed until 

CODE-SETUP

appears

in the LCD display (2).

2. Press the down arrow button (6). 

SYSTEM-SETUP

appears

in the LCD display (2).

3. Press the right arrow button (6). 

VOL/MUTE SETUP

appears

in the LCD display.

4. Press the right arrow button (6). 

ALL VOL.SET

appears in

the LCD display (2).

5. Press the down arrow button (6) repeatedly until

VOL/MUTE SET

appears in the LCD display (2).

6. Press the right arrow button (6). 

MODE VOL. MODE?

appears in the LCD display (2).

7. Press the desired device button (4), such as "DVD". 

PLEASE WAIT...

then 

SUCCESS 

appears in the LCD 

display (2). 

The volume is set via the selected device. Automatic switching
to the volume control on the television is deactivated.

VOL/MUTE RESET

Reset all VOL/MUTE settings to the factory defaults.
1. Hold the 

S

button (5) pressed until 

CODE-SETUP

appears

in the LCD display (2).

2. Press the down arrow button (6). 

SYSTEM-SETUP

appears

in the LCD display (2).

3. Press the right arrow button (6). 

VOL/MUTE SETUP

appears

in the LCD display (2).

4. Press the right arrow button (6). 

ALL VOL.SET

appears in

the LCD display (2).

5. Press the down arrow button (6) repeatedly until

VOL/MUTE RESET

appears in the LCD display (2).

6. Press the right arrow button (6). 

CONFIRM RESET

appears

in the LCD display (2).

7. Press the right arrow button (6). First 

PLEASE WAIT...

then

SUCCESS

appears in the LCD display (2).

The remote control is reset to the factory defaults of the 
manufacturer.

TIME-SETUP

Set the time format and the time.

Note: 

Press the up or down arrow button (6) for 12-hour display. All
other settings are explained using 24-hour display as example.

1. Hold the 

S

button (5) pressed until 

CODE-SETUP

appears

in the LCD display (2).

2. Press the down arrow button (6). 

SYSTEM-SETUP

appears

in the LCD display (2).

3. Press the right arrow button (6). 

VOL/ MUTE SETUP

appears

in the LCD display (2).

12

IB_KH2150_JOE23594_LB3bcI.qxd  05.08.2008  16:52 Uhr  Seite 12

Summary of Contents for KH2150







































Reviews:

No comments

Brands by name

Popular brands

Load more brands