Silvercrest KH 6778, Operating Instructions Manual

Page: 33 / 64

31
C
D
Silvercrest KH 6778
12. Playing audio-CDs
Proceed in the following manner to play audio-CDs on the
DVD Player …
1 Switch on the television to which the DVD Player is con-
nected.
2 Ensure that the DVD Player has been switched on and is
ready for operation.
If the television, DVD player and possibly other connected de-
vices (e.g. an audio component) are operational and switched
on and the DVD player is properly connected to the television,
you can now see the SilverCrest opening logo on the television:
“NoDisc” will appear on the television screen and on the
display on the front of the DVD Player if there is no disc
in the disc drawer of the DVD Player.
3
Open the disc draw on the front of the DVD Player by
pressing the “Open/Close” button once on the front
panel of the DVD Player, or on the remote control. “Open”
will then appear on the display on the front of the DVD
Player and on the television screen.
4 Place an audio-CD, label facing upwards, in the disc
drawer.
5 Press once again the “Open/Close” button on the front
of the DVD Player or on the remote control to close the
disc drawer. “Close” will then appear on the display on
the front of the DVD Player and on the television screen
while the disc drawer is closing.
6 The contents of the audio-CD will then be loaded; this
will take several seconds. “Load” will flash on the display
on the front of the DVD Player, and “Loading” will be dis-
played on the television screen.
7
As soon as the contents of the inserted audio-CD has
been loaded, the display on the front of the DVD Player
will briefly indicate the following …
• The total number of titles on the loaded audio-CD
• The total playing time of the titles on the loaded audio-
CD
8 Audio-CD playback then commences automatically. The
following is faded in on the television screen …
1 2 3 4
1
“CD“
2
The symbols
and for playback mode
3
The number of the currently played track
4
Time played hitherto in hours, minutes and seconds
12.1 Functions while playing an audio-CD
The following DVD Player functions can be used while an
audio-CD is being played …
Stopping playback (Pause)
Proceed in the following manner to stop a title on the loaded
audio-CD …
1 Press once the “Pause/Step” button on the front of the
DVD Player or on the remote control while the title is
being played. “ “ Pause will flash on the display on the
front of the DVD Player, and “ “ Pause will be displayed
on the television screen.
2 Press the “Play” button once to continue playback of
the title.