Silvercrest KH 6507, Operating Manual

Page: 18 / 40

STEREO:
You will hear the first language from the front left and the
second language from the front right speaker.
L-MONO:
You will hear the first language from the front
left and right speakers.
R-MONO:
You will hear the second language from the front
left and right speakers.
MIX-MONO:
You will hear both languages respectively from the
front left and front right speakers.
9.6.6. Setting for HDCD Audio CDs
ô
Note:
These settings are only relevant for the playback of
audio CDs encoded according to the HDCD system.To
make use of the advantages of HDCD, the HDCD filter
of the DVD player must be activated.How to activate/
deactivate this filter is described in the following steps.
1
In the Audio Setup Page, select the submenu item
HDCD.
2
Choose between the options …
Off
Select Off if you do not want to play HDCD audio
CDs with the DVD player. With this setting, the
HDCD filter of the DVD player is deactivated.
On
Select On if you want to play HDCD audio CDs with the
DVD player.With this setting, the HDCD filter of the
DVD player is activated.
9.6.7. Configuring Nighttime Mode
ô
Note:
When you lower the playback volume with the volume
buttons, this affects all 6 audio channels. In other words,
the volumes of background noises as well as music and
dialogue are all lowered equally. In nighttime mode,
however, only the playback volume of background
noises, music, etc. is lowered. This makes the dialogue
remain clearly audible even at a low playback volume.
1
In the Audio Setup Page, select the submenu item
SPEAKER SETUP.
2
In the Analog Setup submenu, select the submenu
item POST DRC. Here you can configure the Night-
time Mode for playing DVDs. This mode can be use-
ful if you wish to watch a DVD at night.
3
Select one of the options On, Off or Auto.
9.6.8. Speaker Settings
ô
Note:
The steps described below only refer to the connection of
the DVD player to an audio component via analog
cables. If you have selected one of the digital connection
options …
Ú
connection via coaxial cable or
Ú
connection via optical cable,
you do not have to configure the speaker settings described
below on the DVD player, but rather on the respective
audio component. Consult the operating manual of this
audio component for information on how to configure the-
se settings.
For optimal sound, it is necessary to adapt the audio
playback to …
Ú
the connected audio components,
Ú
the spatial conditions at the location of the DVD
player / audio components and
Ú
your personal preferences.
9.6.9.1. Configuring Speaker Sizes
To configure the speaker settings if you have connected
the DVD player to an audio component via analog
cable:
1
In the Audio Setup Page, select the submenu item
SPEAKER SETUP.
2
In the Analog Setup Page, select all speakers in
turn:
Front
Select the option ...
Ú
Large, if large speakers are connected for the front audio
channels on the audio component.
18
IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 18