- 4 -
•
Arrange for customer service to repair or replace
connecting cables and/or devices that are not
functioning properly or have been damaged.
Never submerge the device or the power
cable in water. Wipe it only with a slightly
damp cloth.
•
Do not expose the device to rain and never
use it in a humid or wet environment.
•
Ensure that the power cable never becomes
wet during operation.
•
You must not open the housing or repair the
device yourself. Should you do so, device safety
can no longer be assured and the warranty
will become void.
•
Protect the device against drip and spray wa-
ter. Do not place any water-filled vessels (e.g.
flower vases) on the device.
Risk of fire!
•
Do not use the device in the vicinity of hot sur-
faces.
•
Do not locate the device in places exposed to
direct sunlight, If you do, it may overheat and
become irreparably damaged.
•
Do not leave the device unattended when in
use.
•
Never cover the ventilation slots of the device
while it is being used.
•
Do not place any open sources of fire, like
candles, on the device.
Injury hazard
•
Keep children away from the connecting cable
and the device. Children frequently underestimate
the dangers of electrical appliances.
•
Make sure to find a safe place for the device.
•
Do not operate the device if it has sustained
a fall or is damaged. Arrange for the device
to be checked and/or repaired by qualified
technicians.
•
Keep batteries away from children. Children
can put batteries into their mouths and swallow
them.
Danger! Laser radiation!
The device is fitted with a „Class 1 Laser“.
•
Never open the device.
•
Never attempt to repair the device.
•
There is invisible laser radiation inside the device.
Do not expose yourself to the laser beam.
Note:
Some aggressive furniture finishes can have
a destructive influence on the device's rubber
feet. If necessary, place the device on a nonslip
pad.
Thunderstorms!
Equipment connected to a power supply can
be damaged during a thunderstorm. Therefore
during thunderstorms always pull the mains
plug from the mains socket and remove the
antenna cable from the device.
Notice regarding electrical power surges
(EFT / electrical fast transient) and electro-
static discharges:
In a case of malfunction due to an electrical
fast transient (power surge) and/or electrostatic
discharge, the device must be returned to
default settings in order to re-establish normal
operation. Possibly the power supply must be
separated and then reconnected.
IB_KH6504_V865_LB6_V2 24.01.2008 18:26 Uhr Seite 4
Summary of Contents for KH 6504
Page 40: ... 38 ...