manualshive.com logo in svg

Silvercrest KH 2377, Operating Instructions Manual

Share
Download
Silvercrest KH 2377 Operating Instructions Manual Download Page 29

27

Handling and operation

KH 2377

GB

IE

NOTICE

If no titles are found that begin with the set character

 

►

 NO MEDIA

 will be 

shown briefl y and you can carry out the setting again.

Turn the multi controller to select a title and start playback with 

 

‹

BAND/ENT

.

Search for directories

Press the 

 

‹

AS/PS

 button three times. The directory that is currently

playing back appears.

Turn the multi controller to switch between the available directories.

 

‹

Press the 

 

‹

BAND/ENT

 button to select the currently shown directory. 

Playback of the fi rst title from the selected directory starts immediately.

USB port

The device can process USB data carriers up to 16 GB. With this the directory 
structure may contain a maximum of 1024 folders, 4096 fi les and a directory 
depth of 8 levels.

Connecting data carriers

Open the protective cap from the USB port.

 

‹

Connect your USB device to the port. The device searches for MP3 or 

 

‹

WMA fi les on the data carrier and the notice 

USB

 appears in the display.

Place the protective cap back on the USB port when no USB device is 

 

‹

connected to avoid contamination.

   

   

   

 

   

 

Summary of Contents for KH 2377











































Reviews:

No comments

Brands by name

Popular brands

Load more brands