- 6 -
Setting the clock
When you first take the appliance into
use after inserting the battery:
➪
To set the time, press the rotating
switch
CLOCK SET
in and turn it
until the correct time is shown in the
display.
➪
When done, pull the rotating switch
CLOCK SET
back out.
Notice:
The analoge clock only func-
tions with an inserted battery.
Clockface illumination
The clockface illumination can be switched
on and off with the switch
CLOCK LIGHT
ON / OFF
.
Adjusting the alarm timings
If the clock is set correctly, as described
above:
➪
Adjust the alarm time by turning the
rotating switch
ALARM SET
.
Switching the alarm on and off
➪
The alarm is activated when the button
ALARM ON/OFF
is in a raised posi-
tion.
➪
To deactivate the alarm, press the
button
ALARM ON/OFF
back down.
Radio Reception
➪
Turn the
rotating switch
to the
position
FM or AM
.
➪
Turn the volume adjuster
VOLUME
to a central position.
➪
Now tune in to the desired radio station,
by turning the
TUNING adjuster
.
NOTE:
To improve the reception of
radio stations transmitting in FM
frequencies, move the end of the
wire aerial
slowly in various direc-
tions. When you have found the best
reception from the desired transmitter,
fix the wire aerial into this position
e.g. with adhesive tape. An aerial is
built into the appliance for the recep-
tion of AM transmitters . For improved
reception, alter the actual position of
the appliance in radio operation.
External audio sources
You can connect external audio sources
to this appliance with a 3,5 mm jack
plug.
• Connect the audio output of the
external audio source to the
AUX IN
connection
with a 3,5 mm jack
plug.
• Adjust the
rotary switch
to the
position
AUX
.
• The signals from the external audio
source will now be reproduced over
the loudspeakers.
SilverCrest KH 2321
KH2321_Retro_Radio_UK.qxd 31.07.2007 12:34 Uhr Seite 6
