Silvercrest KH 2296, Operating Instructions Manual

Page: 8 / 126

- 6 -
The appliance components
q
Mounting plate/Baseplate
w
Power cable
e
Wire aerial
r
Display
t
POWER - On/Off switch for radio function
y
TIMER - controls the timer programming
u
VOL. — Volume reduction
ALARM SET
q
- controls the alarm function 1
i
VOL. + Volume increase
ALARM SET
w
- controls the alarm function 2
o
Battery compartment
a
MEM. 01-10 - for saving radio stations
s
MEM. 11-20 - for saving radio stations
d
A.O.T. - controls the switch-off timer
f
STORE/Key-Lock - Save button/Button lock
g
T
DOWN
T
- Selection button downwards
h
S
UP
S
- Selection button upwards
j
MODE SET/X-BASS - switches the display options,
activates the Extra-Bass function
Fixing the kitchen radio beneath a wall cabinet
With the supplied mounting plate
q
you can fix the kitchen
radio below, for example, a kitchen wall cabinet:
1. Determine a suitable location for the kitchen radio.
2. Press the two retaining levers on the back of the appliance
down. Push the mounting plate
q
back and remove it.
3. Place the mounting plate
q
against the installation loca-
tion. Allow 3 cm space to the front edges.
This way the kitchen radio will later fit flush.
4. Mark the four points for the drillholes with a pencil.
5. Mark the drillhole with a mandril. Firmly secure the
mounting plate
q
with the supplied screws.
6. Hold the kitchen radio slanted, with the two recesses in
the retaining lugs on the mounting plate
q
.
Press the kitchen radio upwards until it audibly engages.
IB_KH2296_33303_LB4.indb 6 IB_KH2296_33303_LB4.indb 6 13.07.2009 13:44:08 Uhr 13.07.2009 13:44:08 Uhr