Silvercrest KH 2267, Operating Instructions Manual

Page: 11 / 17

- 7 -
15. Adjusting the sound
You can adapt the sound quality to the respective type of
music by means of the sound setting. You can choose
between the following settings:
• Pop
• Jazz
• Pass
• Classic
• Rock
➩
Press the SOUND SELECTION button
2)
or
r
, until the
desired sound appears on the display
e
.
If you adjust the sound setting while playing, the sound will
change immediately.
16. Using headphones
You can connect stereo heaphones to the micro-system with a
3.5 mm jack plug. The headphone socket
4%
is situated on
the front of the micro-system. When you have connected the
headphones, the loudspeakers are disconnected and you will
hear the sound via the headphones only.
➩
Push the jack plug on the headphones into the headphone
socket
4%
.
17. Setting the clock
You can only adjust the clock in standby mode.
➩
Press the PROGRAMMING BUTTON
y
or
3@
and keep it
pressed for approx. three seconds.
➩
In order to adjust the 24-hour or 12-hour mode, please
press the button
g
resp.
2%
or
h
resp.
3!
.
➩
To store the setting press the PROGRAMMING BUTTON
y
or
3@
The hours indication flashes on the display.
➩
To set the hours press the buttons
g
resp.
2%
or
h
resp.
3!
.
➩
To store the setting press the PROGRAMMING BUTTON
y
or
3@
.
The minute indication will flash on the display.
➩
To set the minutes press the buttons
g
resp.
2%
or
h
resp.
3!
.
➩
Press the PROGRAMMING BUTTON again
y
or
3@
.
The time is set and active.
KH 2267 / 2268
18. Setting the alarm function (timer)
You can program your micro-system to wake you up. For this
purpose you can set the desired waking time, the sound source
and the volume. The micro-system will then switch on and off
according to the set time. You can be woken up by the radio
or to the sound of a CD.
➩
If you wish to be woken by a CD, please insert the desired
CD into the CD compartment
q
.
➩
If you wish to be woken by the radio, please select a radio
station by means of the BAND SELECTION BUTTON
i
resp.
2!
.
Setting the switch-on time
➩
Press the TIMER button
u
resp.
3$
.
The hour indication for the switch-on time flashes on the display.
➩
To set the hours for the switch-on time press the button
g
resp.
2%
or
h
resp.
3!
.
➩
To store the setting press the TIMER
u
resp.
3$
button
again.
The minute indication for the switch-on time flashes on the
display
➩
To set the minutes press the button
g
resp.
2%
or
h
resp.
3!
.
Setting the switch-off time
➩
To enter the hours for the switch-off time press the TIMER
u
resp.
3$
button.
The hours indication flashes on the display.
➩
To adjust the hours press the button
g
resp.
2%
or
h
resp.
3!
.
➩
To store the setting press the TIMER
u
resp.
3$
button
again.
The minute display for the switch-off time flashes on the display.
➩
To set the minutes press the buttons
g
resp.
2%
or
h
resp.
3!
.
Setting the sound source
➩
Press the TIMER
u
resp.
3$
button.
The sound source indication flashes on the display.
➩
Select the desired sound source by pressing buttons
g
resp.
2%
or
h
resp.
3!
.
Adjusting the volume
➩
Press the TIMER
u
resp.
3$
button.
The volume indication flashes on the display.
➩
Select the desired volume using buttons
g
resp.
2%
or
h
resp.
3!
.
Storing the settings
➩
Press the TIMER
u
resp.
3$
button.
The alarm function settings will be shown on the display one
after another. A clock symbol indicates that the alarm
function is active.
KH2267_68_Mikroanlage_EN.qxd 31.03.2006 13:31 Uhr Seite 7