7
Setting up and connecting
KH 2131
GB
IE
Disposal of the packaging
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
If possible preserve the device's original packaging during the warranty
►
period so that in the case of a warranty claim you can package the device
properly for return.
Requirements on the Installation Location
For the safe and error-free operation of the device, the installation location must
fulfi ll the following conditions:
Place the device on a fi rm, fl at and level surface.
■
Do not locate the device in a hot, wet or very humid environment or close to
■
fl ammable material.
The surfaces of furniture may contain components that could attack and
■
weaken the rubber pads of the device. If necessary, place an anti-slip mat or
similar under the rubber pads of the device.
The mains power socket must at all times be easily accessible, so that the
■
power adapter can be easily and quickly removed if necessary.
Electrical connections
Before connecting up, compare the connection data (voltage and frequency)
■
on the type plate of the device with that of your power supply network.
This data must tally in order to avoid damage to the device.
Check to ensure that the power cable of the device is undamaged and that it
■
will not be laid over hot surfaces and/or sharp edges.
Ensure that the power cable is not over taut or crimped/folded.
■
Do not let the power cable hang over edges (trip wire eff ect).
■
NOTICE
It is recommended that, in addition to switching the radio transmission set
►
off , you disconnect the power adapter from the mains power supply or
use switchable power strips. Only in this way can it be ensured that the
device is fully switched off and a contribution made to the economical use
of power.
