9
GB/IE
Q
Getting started
1. Open the battery compartment
8
on the back
of the product by pushing the clip of the battery
compartment cover
9
towards the battery
compartment
8
and lift the cover off.
2. Remove the isolating strip. This is located
between the battery and the battery compart-
ment
8
.
3. Replace the battery compartment cover
9
on
the battery compartment
8
. Make sure that
the two extensions on the battery compartment
cover
9
engage in the two openings in the
battery compartment
8
. Press the battery
compartment cover
9
onto the battery com-
partment
8
until it noticeably and audibly
clicks into place.
Q
Replacing battery
1. Open the battery compartment
8
as described
above.
2. Remove the used battery from the battery com-
partment
8
by gently pulling the grip
10
out-
wards. Make sure that you do not exert too
much pressure on the grip
10
or it may other-
wise be damaged.
Remove the battery from the battery compart-
ment
8
.
3. Insert the new battery. Make sure that the polarity
is correct. The “+“ must be pointing upwards and
the battery is held in the battery compartment
8
.
4. Close the battery compartment
8
as described
above.
Q
Weighing
NOTE:
The kitchen scale
2
always starts at
0 g / 0.0 oz (the temperature will also be shown)
when you switch it on. If you place the weighing
bowl
1
on the kitchen scale
2
before switching
it on, 0 g / 0.0 oz “Zero“ is displayed.
However, if you place the weighing bowl
1
on
the kitchen scale
2
after you have switched it on,
the scale will indicate the weight of the weighing
bowl
1
. Press the zero button
7
to reset the dis-
play to 0 g / 0.0 oz.
j
Place the weighing bowl
1
on the kitchen
scale
2
.
j
Press the ON / OFF button
3
to switch the
kitchen scale
2
on.
j
Select the unit of weight by pressing the Unit
button
6
. You can choose between “g / kg“
and “oz / lb“.
j
Place the food you wish to weigh in the bowl.
j
The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
NOTE:
The scale operates almost exactly the
same way without the bowl
1
. To operate without
bowl, simply follow & repeat the same steps as
above except starting without the bowl
1
.
Q
Weigh and add
The kitchen scale
2
allows you to weigh foods
consecutively without removing food already in the
weighing bowl
1
.
j
Place the weighing bowl
1
on the kitchen
scale
2
.
j
Press the ON / OFF button
3
to switch the
kitchen scale
2
on.
j
Select the unit of weight by pressing the Unit
button
6
. You can choose between “g / kg“
and “oz / lb“.
j
Place the food you wish to weigh in the bowl.
j
The LCD readout
5
indicates the weight of the
food in the selected unit of weight.
j
Now press the zero button
7
. The scale now
reads “TARE“.
j
Now place more food in the weighing bowl
1
.
j
The LCD readout
5
indicates the weight of the
food you have added in the selected unit of weight.
j
Continue in this way only until the maximum
capacity of the kitchen scale
2
is reached or
the weighing bowl
1
is full.
