Silvercrest DataBox VI 1000, User Manual And Service Information

Page: 7 / 44

English DataBox VI 1000
6
Only connection cables and external devices may be used that comply with safety
standards and the electromagnetic compatibility and shielding quality of this
device. This device fulfills all that relates to CE Conformity, relevant norms and
standards. Any changes to the equipment other than the recommended changes
by the manufacturer may lead to the result that these directives are not met any
more. Only use accessories recommended by the manufacturer.
- Do not allow children to play with electrical devices when not under supervision.
Children may not be able to comprehend the presence of potential risks.
- Keep the packaging away from children to avoid the danger of suffocation.
- Always hold cables by the plug and never pull on the cable itself. Never hold the
power cord with wet hands as this may cause a short circuit or electric shock.
Never place the device, heavy objects or furniture on the cable and take care that
the cord does not become trapped, especially at the plug and sockets. Never make
knots in the cable and do not tie it together with other cords. All cables should be
positioned so that nobody can trip over them or be obstructed by them. A damaged
power cord can cause a fire or an electric shock. Inspect the power cord from time
to time. Never use adapter plugs or extension cables that don't comply with the
current safety regulations in your country, and don't modify any of the power cords
or electrical installations yourself.
- The power switch of this device does not fully disconnect the device from the
mains. Furthermore, the device consumes electricity whilst connected. In order to
completely disconnect the device from the mains, the power adapter must be
pulled out from the wall outlet. For this reason, the device should be positioned in a
way that assures a direct and unobstructed access to the wall outlet so that the
power adapter can be immediately pulled out in an emergency situation. To avoid
the danger of fire if the power adapter is not going to be used for a long while (e.g.
during holidays), it should always be disconnected from the power socket. Before
stormy weather when there is the danger of lightning, disconnect the device from
the power supply.
- Use only the supplied power adapter model KSAF F1200250W1UK to avoid
overheating, deformation of housing, fire, electric shock, explosions and other
dangers. Never connect this power adapter to other devices.
- The Silvercrest DataBox saves data on a magnetic surface. For this reason, keep
your Silvercrest DataBox away from sources that generate magnetic and
electromagnetic fields.
- Install the cables in a safe way. Avoid tripping over them.
- Do not attempt to open the Silvercrest DataBox housing. Otherwise you will lose
your warranty rights.
- Do not remove any cables before properly shutting down the device in the
operating system (see page 12 – Disconnecting).