SilverCrest SSKE 300 A1
18 - English
2.
Place the lid (2) with the measuring cap inserted (1) on the blender jug (3) and lock into place.
3.
Connect the power cable (9) of the mains plug to a live wall outlet. You will then hear a beep.
4.
Press the ON/OFF button (16) on the control panel (7). A beep will now sound and the LEDs for the
control panel (7) buttons will flash.
5.
Press the HEAT-UP button (10) on the control panel (7) to start the process. The LED for the selected
function will now light up.
The contents will be stirred and heated alternately. Once the process is finished, 10 beeps will sound
and the LEDs on the bottom row of the control panel (7) will flash.
If necessary, the heating process can also be manually stopped early. To do so, press the
ON/OFF button (16) on the control panel (7).
6.
Switch the appliance off and carefully remove the lid (2).
7.
Pour the contents out of the blender jug (3).
Preparing vegetable purées
1.
Chop the pre-cooked vegetables into approx. 2cm sized pieces and add to the blender jug (3). Fill
the blender jug (3) with water or stock. Do not fill past the "MAX 1.7 L" mark.
2.
Place the lid (2) with the measuring cap inserted (1) on the blender jug (3) and lock into place.
3.
Connect the power cable (9) of the mains plug to a live wall outlet. You will then hear a beep.
4.
Press the ON/OFF button (16) on the control panel (7). A beep will now sound and the LEDs for the
control panel (7) buttons will flash.
5.
Press the BLEND button (15) on the control panel (7) to start the process. The LED for the selected
function will now light up.
The contents will be blended in multiple phases. Once preparation has finished, 10 beeps will sound
and the LEDs on the bottom row of the control panel (7) will flash.
If necessary, the blending process can also be manually stopped early. To do so, press the
ON/OFF button (16) on the control panel (7).
6.
Switch the appliance off and remove the lid (2).
7.
Pour the contents out of the blender jug (3).
Preparing fruit compote
1.
Peel the fruit and chop into approx. 2cm sized pieces. Add to the blender jug (3).
2.
Fill the blender jug (3) with water to the "MIN 0.3 L" mark.
3.
Place the lid (2) with the measuring cap inserted (1) on the blender jug (3) and lock into place.
4.
Connect the power cable (9) of the mains plug to a live wall outlet. You will then hear a beep.
5.
Press the ON/OFF button (16) on the control panel (7). A beep will now sound and the LEDs for the
control panel (7) buttons will flash.
