Silvercrest COCOON M1450 TWIN, User Manual

Page: 23 / 49

21
Cocoon M1450 TWIN Handset - settings and operation
ENGLISH
– ‘ On ’: switches keypad beep on.
– ‘ Off ’: switches keypad beep off.
7. Press
2
to confirm your selection or press
14
to quit the menu
without saving the setting.
4.18 Adjust the display contrast
1. Press 2 .
2. Press 3 or
11
repeatedly, select ‘ Handset ’.
3. Press
2
to confirm.
4. Press 3 or
11
repeatedly, select ‘ Contrast ’.
5. Press
2
to confirm.
6. Select the contrast (8 contrast levels) using 3 or
11
.
7. Press
2
to confirm your selection or press 14 to quit the menu.
4.19 Edit handset name
The procedure for changing the name of your handset shown in the display in standby mode
is as follows:
1. Press
2 .
2. Press 3 or 11 repeatedly, select ‘ Handset ’.
3. Press
2
to confirm.
4. Press 3 or 11 repeatedly, select ‘ Handset Name ’.
5. Press 2 to confirm.
6. Press
14
repeatedly to delete the letters one after the other and use the
alphanumeric keys to enter a new name.
7. Press ‘ Save ’ 2 to set the new handset name.
4.20 Temporarily show or hide your telephone number
When you call someone, your telephone number will be shown at your corresponded phone.
When you have disabled this function permanent at your telephone provider side you can
temporarily show your number:
1. Press R
4
.
2. Press 3 or 11 repeatedly, select ‘ Show Number ’
3. Press
2
to confirm.
4. Dial the telephone number you want to call.
5. Press
12
.
If you always show your number you can hide it temporarily:
1. Press R
4
.
2. Press
3
or
11
repeatedly, select ‘ Hide Number ’.
3. Press
2
to confirm.
4. Dial the telephone number you want to call.
5. Press
12
.
4.21 Direct Call
By setting a Direct Call number, the phone will automatically take the line by any key press
and dial out this number. This function is useful to use the phone as a emergency phone or
to prevent unauthorized use.