14
SDBS 2200 A1
GB
IE
Steam ironing
♦
Press the on/off button
to switch on the appliance. The indicator in the
On/off button
and the “Iron dry” indicator
light up.
♦
Press the boiler button
to activate steam ironing mode. The indicator in
the boiler button
lights up, and the “Iron dry” indicator
goes out.
NOTE
The boiler is located in the bottom of the appliance and is automatically supplied
with water from the water tank
by means of a pump. During heating up
and refi lling the boiler, the pump switches on for a few seconds. This causes a
humming noise and you will feel the appliance vibrate. This is normal and is
not a reason for complaints.
♦
After a few minutes, the “Steam ready” indicator
lights up.
♦
Turn the temperature control
to set the desired ironing temperature.
NOTE
For steam ironing you must set at least the medium temperature ● ● on the
temperature control
.
♦
The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator
goes out, the set temperature has
been reached and you can start steam ironing.
♦
Set the steam control
to the desired steam setting. Turn the control
clockwise to increase the amount of steam. Turn it in the opposite direction
to reduce the amount of steam.
♦
If the iron
is fi xed to the base station
using the catch
, push the
catch release
into the
position. Now you can remove the iron
from the base station
.
♦
While ironing, you can press the steam blast button
to give a continuing
blast of steam from the soleplate
onto the clothes. Press the Steam stop
button
to stop the steam output.
NOTE
If you only want a short steam blast, press the Steam stop button
briefl y
and then release it. The steam only comes out of the soleplate
as long as
you hold down the button and stops when you release it.
Summary of Contents for 96145
Page 3: ...A B ...
