10
SHBS 5 A1
GB
CY
Oiling the cutting attachments
We recommend that you oil the hair trimmer
, beard trimmer
7
and precision trimmer attach-
ments
8
before fi rst use and after cleaning to ensure full mobility.
♦
To do this, simply apply a couple of drops of blade oil (accessory) between the blades, and
then distribute it evenly.
♦
Wipe off any access oil with a soft cloth. Use only non-corrosive oils such as sewing machine oil.
Handling and use
Attaching/changing the cutter attachments
WARNING
►
Switch off the appliance before attaching or changing the cutter attachments.
There is a risk of personal injury!
♦
Press your thumbs forwards against the cutter attachment to release it from its holder
(see Fig. D). Then remove the cutter attachment from the appliance.
♦
To attach the cutter attachment, insert the lower plug-in tab into the opening on the appliance
(see Fig. E).
♦
Then press the upper part of the cutter attachment onto the appliance until it audibly clicks into
place and is fi rmly seated (see Fig. F).
Attaching/changing the comb attachments
Comb attachment for the hair trimmer attachment
The comb attachment
11
has settings for 6 diff erent cut lengths (13 mm/15 mm/17 mm/
19 mm/21 mm/23 mm).
♦
Attach the comb attachment
11
from the front onto the hair trimmer attachment
and press
the rear end fi rmly until it clicks into place.
♦
To remove the comb attachment
11
, release the lower end and pull it forwards off the appliance.
IB_96126_SHBS5A1_LB7.indb 10
IB_96126_SHBS5A1_LB7.indb 10
21.01.14 15:37
21.01.14 15:37