12 GB/IE/NI/CY
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children .
Protect the product against
heat .
Do not place the product close
to open flames or heat sources
such as stoves or heating
appliances .
Before first use
Remove all packaging materials . Check if all
parts are complete .
NOTE:
The product's built-in battery is not
charged on delivery . Charge the battery
completely before first use (see “Charging
the product” section) .
Assembly
Product assembly
Push the vacuum attachment 1 onto the
suction head 12 .
Attaching the wiper
NOTES:
Prior to assembling the wiper 4 , fill the
water container 6
with water and/or
cleaning detergent .
Do not use abrasive or aggressive cleaning
detergents . These could damage the product .
Do not exceed the water container's 6
maximum capacity of 360 ml .
Screw the wiper 4 onto the water
container 6 .
Unfasten the hook-and-loop strap on the
side of the microfiber cover 3 where is it is
located .
Place a microfiber cover 3 on the wiper 4 .
Fasten the hook-and-loop strap of the
microfiber cover 3 .
Operation
Charging the product
NOTES:
Before charging the battery: Switch off the
product .
Connect the plug of the charger 2 to the
charging socket 7 .
Connect the charger 2 with a suitable wall
outlet . 10 lights up red .
When the battery is fully charged, 10
lights up blue .
Disconnect the product from the charger 2 .
Do not leave the product permanently
connected to the charger 2 to avoid
damage to the battery or the product .
On/off button light pattern
Light
10
Status
Blue on
Power on . Fully charged
(when charging) .
Red on
Charging .
Red flashing (slow) Low power level .
The product keeps
operating .
Red flashing (fast) Battery empty . The
product turns off after
1 minute .
Close the charging socket 7 with the
stopper 7 .
