Silvercrest 368338 2010, Operating Instructions Manual

Page: 10 / 40

SDRB 1000 B1 GB
│
IE
│
NI
│
CY
│
7 ■
CAUTION
► Always remove the plug
7
from the power
socket before filling the appliance! There is a
risk of electric shock!
♦ Remove the water tank
1
by sliding back the
release
4
of the water tank
1
until you can lift
the water tank
1
up. Grip the water tank
1
by the protruding gripping aids with your thumb
and index finger and lift it up vertically. The tem-
perature control
3
stays on the appliance and
is not removed along with the water tank.
♦ Open the filler opening
2
in the water tank
1
.
♦ Use the measuring cup
t
to fill the water tank
1
with water to the "Max" marking.
♦ Close the filler opening
2
in the water tank
1
.
Ensure that the collar in the filler opening
2
locks into the notch on the lid. This means that
the water tank
1
is properly closed.
♦ Replace the water tank
1
onto the appliance.
The water tank
1
must audibly click into the
release of the water tank
4
.
Attaching/removing the brush
extension
CAUTION
► Never remove or attach the brush extension
w
while the appliance is hot.
Risk of burns!
♦ To use the steam and brush functions, please at-
tach the brush extension
w
to the steam brush.
♦ To do this, push the brush extension
w
onto
the appliance along the guide aid until it is fully
attached. The release of the brush extension
q
must click into place audibly.
♦ To use the ironing function, please remove the
brush extension
w
from the steam brush.
♦ To do this, push the release
q
downwards and
pull the brush extension
w
off the appliance.
Steam brush function
♦ Attach the brush extension
w
to the appliance.
It must audibly click into the release of the brush
extension
q
.
♦ Insert the plug
7
into a properly installed and
grounded wall socket.
♦ To produce steam, set the temperature control
3
to ••• or higher. The heat-up indicator lamp
5
lights up. As soon as the selected temperature
has been reached, the heat-up indicator lamp
5
goes out.
NOTE
► To use the steam burst function, set the tem-
perature control
3
to ••• or higher.
Lower temperatures are insufficient for pro-
ducing a burst of steam.
♦ You can now produce a burst of steam by press-
ing the steam burst button
8
.
NOTE
► To produce the first burst of steam after heat-
ing the appliance, you may have to press the
steam burst button
8
several times in a row.
The appliance is now ready for use.
CAUTION
► The steam brush can be used with any piece
of clothing. Be careful when treating heat-
sensitive textiles such as synthetics, polyamide
or artificial silk. Before treating such materials,
first process a small test patch in an invisible
spot (inside of the seam) to ensure that the hot
steam does not damage the material. Do not
apply the hot ironing sole
0
to these materi-
als directly. Only use the steam burst function.
IB_368338_SDRB1000B1_LB6_GB-IE-NI-CY.indb 7 19.01.2021 15:45:39