61
GB
10.3 Setting cooking
program and starting
NOTE:
the cancel button
Keep Warm/
Cancel
37
allows you to cancel the set-
tings or a running program at any time.
1. Press the desired program button. The
LEDs above the program button and
above the Start button
Start
44
will
flash. The display
29
shows the cook-
ing time set as
Normal
51
and the pre-
set cooking time will flash.
As long as the LEDs and the display are
flashing, the settings for the time and pres-
sure level can be changed.
NOTE:
the preset values and the adjustable
ranges can be found in the table in chapter
“Overview of functions” on page 53.
2. If desired, first change the pressure level:
Press the pressure button
Pressure
Level
40
to switch between
High
54
and
Low
56
.
3. The change the cooking time within the
adjustable range:
- Repeatedly press the program button
to switch between the default settings
Less, Normal, More
51
.
- You can use the buttons
+
33/–
46
if
necessary to set the desired time man-
ually.
- By keeping the buttons
+
33/–
46
pressed, you can cycle through the
values faster.
4. Briefly press the Start button
Start
44
to start the cooking program.
- The LEDs above the selected program
button and above the Start button
Start
44
will be lit continuously.
- The display
29
will show
ON
and a
running progress bar
55
, indicating
that the device is heating up and
building up pressure.
- This may take some time depending
on filling volume and cooking pro-
gram.
5. When the temperature and pressure
have been reached, the cooking pro-
gram starts automatically.
- The display
29
counts down the
cooking time.
- In order to maintain the temperature,
the device automatically switches
back and forth between heating up
(progress bar
55
running) and heat-
ing switched off (progress bar
55
sta-
tionary).
6. The end of the cooking process is sig-
nalled by beeps. The device automati-
cally switches to the warm program.
The LED of the Cancel button
Keep
Warm/Cancel
37
is lit. The dis-
play
29
counts the warm time upwards
from
00:00.
The pressure is slowly re-
leased.
10.4 Interrupt the cooking
process
• To cancel a running program, press the
Cancel button
Keep Warm/Can-
cel
37
.
The device is then in standby mode. The
display
29
will show
OFF
.
57
This symbol indicates that
the device is heating up
and building up pressure.
53
This symbol indicates that
the set pressure has been
reached.
P
__367792_2101_Schnellkochtopf_CY.book Seite 61 Mittwoch, 9. Juni 2021 10:18 10