Silvercrest 361070 2007, Operating Instructions Manual

Page: 13 / 162

SSBS 3.0 A1
■ 10 │
GB
NOTE
► The next time you switch on the device, the remote
release
8
will connect automatically to the last-connected
smartphone. If your smartphone does not automatically
connect to the remote release
8
, you must establish the
connection manually. You can find a detailed description
of how to do this in the operating instructions for your
smartphone.
► If you want to connect another smartphone to the remote
release
8
, press and hold the button
e
for about
2 seconds. The operating LED briefly flashes blue twice
and then continues to flash every second. The remote
release
8
is now in pairing mode for about 1 minute and
can now be connected to another smartphone.
Attaching a smartphone to the selfie stick
♦ Pull the clamps of the smartphone holder
2
open.
♦ Place the smartphone between the clamps of the smart-
phone holder
2
by pushing the upper clamp upwards
against the spring force. Check that your smartphone is
securely in place.
♦ Loosen the locking screw
3
and adjust the vertical tilt angle
of the smartphone. Fix the smartphone in the desired posi-
tion by re-tightening the locking screw
3
.
♦ If necessary, attach the remote release
8
to the lower part of
the telescopic shaft
4
using the remote release holder
r
.