Silvercrest 359294 2010, Assembly, Operating And Safety Instructions

Page: 17 / 75

17 GB/IE/NI/CY
Vacuuming
Before vacuuming, ensure that
the dust collector
21
with the fil-
ters (HEPA filter
25
and stainless
steel filter
27
) is correctly installed
(see chapter “Emptying the dust
collector” / “Cleaning the filters
and dust collector”).
Ensure that the rechargeable
battery
2
is charged and in-
stalled before use (see chapter
“Charging the rechargeable
battery”).
Before vacuuming, ensure that
no large, sharp or pointed objects
are lying on the surface to be
cleaned.
Make sure that the surface to be
cleaned is dry.
Note:
Switch the main unit
4
off after cleaning each surface to
conserve the operating time of the
rechargeable battery
2
. Charge
the rechargeable battery
2
after
use (see chapter “Charging the
rechargeable battery”).
When vacuuming, be aware
of your surroundings to avoid
damage to the product and
other objects.
Choose the suitable accessory if needed (see
chapter “Selecting, assembling and disassem-
bling accessories”).
Press and hold down the On / Off button
19
for approx. 2-3 seconds (see Fig. A) and start
vacuuming.
Now select one of the two vacuuming levels by
pressing the MAX button
18
or the ECO button
17
(see Fig. A).
MAX mode: full vacuuming power, runtime
approx. 25 minutes.
ECO mode: reduced vacuuming power,
runtime approx. 45 minutes.
Press the On / Off button
19
again to switch
the product off (see Fig. A).
After use
Store the main unit
4
after use
either by hanging it on the wall
bracket
5
(see Fig. C) or lying it
out of the reach of children and
pets in a protected location where
no one can trip over or step on
the main unit
4
with aluminium
suction tube
16
or the mains
cable.
Charge the rechargeable battery
2
again after
use (see chapter “Charging the rechargeable
battery”).
The aluminium suction tube
16
and the electric
floor brush
14
can be left attached to the main
unit
4
during storage.
Storing the accessories:
Insert the small brush
11
, dust brush
12
and
crevice nozzle
13
in the accessory holder
10
for storage (see figure).
Put the accessory holder
10
on the aluminium
suction tube
16
.