Silvercrest 359282 2007, Operating Instructions And Safety Instructions

Page: 11 / 76

■ 8 │
GB
│
CY
SRB 6 A1
♦ To remove an attachment
9
/
8
/
7
/
6
, pull it from the attachment
holder
0
with a small amount of force (see fig. 7).
Fig. 6 Fig. 7
Operation and control
CAUTION - DAMAGE TO APPLIANCE!
► Do not use abrasive cleaning agents. They could irreparably damage
the surface you are cleaning.
► The hard bristles and the scrubbing sponge pad of the attachments
9
/
8
/
7
/
6
can scratch or damage sensitive surfaces such as glass, ve-
hicle paintwork, stainless steel, copper, wood, etc. First test the attachments
9
/
8
/
7
/
6
on an inconspicuous spot of the area to be cleaned.
NOTE
► Use the appliance with water; for more difficult stains use a mild cleaning
detergent. Apply the detergent directly onto the attachment
9
/
8
/
7
/
6
and/or on the area to be cleaned before switching on the appliance.
► After every use clean the appliance and the used attachments
9
/
8
/
7
/
6
as explained in the section Cleaning and maintenance .
♦ Hold the appliance tightly over the area to be cleaned.
♦ Switch on the appliance by pressing the On/Off switch
2
.
♦ Move the attachment
9
/
8
/
7
/
6
with light pressure over the area to
be cleaned. Apply more water and/or cleaning detergent, as needed, to
the area to be cleaned.
♦ Once you have finished using the appliance, press the On/Off switch
2
again to switch it off.
IB_359282_SRB6A1_LB7.indb 8 08.01.2021 10:49:56