SWKS 2400 I1
■
10
│
GB
│
IE
│
NI
│
CY
Inserting/removing the scale filter insert
The spout of the kettle is fitted with a scale filter
6
insert, which can become
clogged with particles or scale over time. To clean the scale filter
6
insert,
simply remove it from the appliance.
1) Open the lid.
2) Inside the jug, press the protruding tab on the scale filter insert
6
slightly
downwards so that the scale filter insert
6
can be removed.
3) Clean the scale filter insert
6
with a slightly moistened dishcloth and under
running water.
4) First, place the scale filter insert
6
with the lower lock in the recess inside the
kettle. Press the protruding tab on the scale filter insert
6
slightly downwards
and slide it under the holder. Ensure that the scale filter insert
6
clicks into
place properly.
NOTE
►
If scale deposits have solidified in the scale filter insert
6
, place the filter in
a water-vinegar solution with a ratio of 6:1 for a few hours. The scale de-
posits will dissolve. Rinse the scale filter insert
6
with plenty of fresh water.
Storage
■
Allow the appliance to cool down completely before putting it into storage.
■
Wind the power cable around the cable winder
5
under the base
4
.
■
Store the appliance at a dry location.
IB_338197_SWKS2400I1_LB6-.indb 10
28.05.2020 10:53:19
Summary of Contents for 338197 2001
Page 3: ...5 1 3 2 4 6 ...
Page 17: ...SWKS 2400 I1 14 GB IE NI CY ...
Page 31: ...SWKS 2400 I1 28 GR CY ...
Page 45: ...SWKS 2400 I1 42 DE AT CH ...