32 GB/IE
NOTES:
When turning the product on, the product
will continue in the mode it was in when it
was last turned off .
To save energy the product will
automatically switch to standby mode when
there is no input signal (or only a weak one),
and when the CD player is not in use .
Select modes
To get to the desired function mode, press
SOURCE
7 repeatedly or press
CD
,
USB
,
TUNER / DAB
,
AUX
or
BT
21 to select the
desired mode .
Adjust the bass
Press
BASS +
/
–
39 repeatedly to select a preset
sound effect:
Bass 0
,
Bass 1
,
Bass 2
.
Adjust the volume
Press
VOL
+
/
–
43 or turn
VOL+
/
VOL–
control 2 to adjust the volume .
To turn the sound off, press 41 .
Press again or press
VOL
+
/
–
43 or turn
VOL+
/
VOL–
control 2 to resume normal
volume .
Volume memory
The last used volume level will be
automatically stored .
Select the equaliser
Press
EQ
13 / 40 repeatedly to select:
[POP]
–
[CLASSIC]
–
[ROCK]
–
[JAZZ]
–
[FLAT]
.
Adjust the brightness
Press
DIMMER
35 to select the brightness
level .
Set the clock
Setting of the clock can only be done in STANDBY
mode .
In STANDBY mode, press and hold
CLOCK
32 until the hour digits are flashing .
Press , 27 to adjust the hour digits . Press
CLOCK
32 to confirm . The minute digits are
flashing .
Press , 27 to adjust the minute digits .
Press
CLOCK
32 to confirm .
NOTE:
Each activated state will be cleared
if any buttons are not pressed within
20 seconds .
Toggling between 12/24 hour formats:
During time setup, press
15
or 42 .
NOTE:
If the product is unplugged or if
a power failure occurs, all setups of the
product will be erased .
NOTE:
While the DAB mode is selected, the
clock is set automatically .
Time display
Press
CLOCK
32 to show the current time on the
display for a few seconds .
Set the alarm timer
NOTE:
The clock must be correctly set for
the timer to operate correctly .
In STANDBY mode, press and hold
TIMER
38 until the hour digits flash on the
display .
Press , 27 to adjust the hour digits . Press
TIMER
38 to confirm . The minute digits will
flash on the display .
Press , 27 to adjust the minute digits .
Press
TIMER
38 to confirm .
BUZZER
flashes on the display .
Press , 27 to select
FM
/
DAB
/
CD
/
USB
/
BUZZ
mode . Press
TIMER
38 to confirm . The display will show
the volume level .
Press , 27 to adjust the volume . Press
TIMER
38 to confirm .
Short press
TIMER
38
Description Display
1x
Timer on
2x
Timer off
–
NOTE:
The operating time to set each step
must not take longer than 20 seconds or it
will return to time display .
