Silvercrest 331979 1907, Operating Instructions Manual

Page: 24 / 106

SDB 2400 F4 GB
│
IE
│
21 ■
Filling the water tank
1) Hold the iron in your hand at an angle.
2) Open the cover of the filler opening for the water tank .
3) Using the measuring beaker
!
, fill the water tank with water to the "MAX"
marking, but no further.
4) Close the cover of the filler opening for the water tank .
NOTE
► If the mains water in your location is rated as hard, we recommend that
you mix the mains water with some distilled water. Otherwise, the jets for
the steam blast function could become blocked with limescale prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
Water hardness Ratio of distilled water to tap water
very soft/soft 0
medium 1: 1
hard 2: 1
very hard 3: 1
The water hardness level can be queried at your local water works.
Plugging in and ironing
Dry ironing without steam is possible at all temperatures, steam ironing is only
possible from the setting range
on the temperature control .
1) Insert the plug into a mains power socket.
CAUTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing ( ), the garment must not
be ironed. Ignoring this warning could lead to permanent damage to the
clothing item.