24 GB/IE
Set the desired time on the cooking time knob
2
.
When doing so, refer to the weight of the food
or the manufacturer’s instructions.
The product begins to heat up the food automat-
ically after the cooking time is set.
After the set cooking time has expired, the cook-
ing process ends automatically and a beep tone
sounds.
If you want to end the cooking process early,
manually turn the cooking time knob
2
to “0”,
which will trigger the beep tone.
Open the door
8
by pulling on the door
handle
9
.
Always set the cooking time knob
2
to “0”
when the product is not in use.
Defrost function
In the following list you can find the approximate
defrosting time needed for different weights. Use the
cooking level “Medium-low (defrost)”
. Extend
the defrosting time as necessary if the desired weight
is not yet defrosted.
Weight
Time
200 g
approx. 5 minutes
30 seconds
400 g
approx. 10 minutes
30 seconds
600 g
approx. 15 minutes
30 seconds
800 g
approx. 20 minutes
30 seconds
1000 g
approx. 25 minutes
30 seconds
To defrost 500 g of minced meat, use the following
settings:
Select the cooking level “Medium-low
(defrost)“
.
Set the cooking time knob to 11 minutes.
For even defrosting, open the door
8
after
7 minutes and turn the minced meat over.
Close the door
8
and continue the defrosting
process.
At the end of the defrosting process, leave the
minced meat to stand for a further 5 minutes.
Cleaning, maintenance
and storage
If the product is not kept clean, this can lead to
wear and tear which compromises the service life
of the product and leads to dangerous situations.
Clean the door
8
and the door locking mech-
anism
10
regularly.
The product must not be cleaned using a steam
cleaner.
Remove any food residues regularly.
Do not use harsh cleaning agents or scouring
agents.
Unplug the mains plug from the mains socket if
you are not using the product for a long period
of time.
Make sure that all parts are completely dry
before you use the product.
Clean the product using a soft sponge and
some soapy water.
The glass plate
7
is dishwasher-
safe.
Troubleshooting
Problem
Cause
Solution
The product won't start.
The mains plug is not firmly plugged in. Unplug the mains plug and plug
it back in after 10 seconds.
The fuse has burnt through or the
switch-disconnector has triggered.
Contact the service centre.
