Silvercrest 323748 1901, Operation And Safety Notes

Page: 22 / 75

22 GB/IE
¾
While steam smoothing: The clothes absorb
moisture . Allow the clothes to dry completely
before storing them in your wardrobe .
Continuous steam operation
During continuous operation, hot steam exits out
of the steam nozzles 2 without the need to keep
pressing in 4 .
Continuous steam operation
Start
continuous
operation
Press in 4 . Move down the
lock 4 .
Stop
continuous
operation
Move up the lock 4 .
¾
If water drips out of the steam nozzles 2 : Pull
up the lock 4 . Release 4 .The products
heats up now .
˜
Steam smoothing curtains and
upholstery
¾
Remove creases and wrinkles from curtains and
upholstery by hanging these over a railing and
then tightening them .
¾
Before steam smoothing: Always carry out a test
on an inconspicuous piece of the fabric .
¾
Steam the curtains/upholstery (see “Steam
smoothing clothes”) .
¾
When using the product horizontally: Hold the
product vertically from time to time to maintain
the maximum steam power .
˜
Stop steam smoothing
¾
Move up the lock 4 , if applicable . Release
4 .
¾
Place the product, with its base 7 , on a flat and
stable surface .
¾
Disconnect the power plug 9 from the power
socket .
¾
Let the product cool down (for approx .
15 minutes) . Do not leave the product
unattended while it is still hot .
¾
Empty the water tank 6 after each use to
prevent limescale (see “Filling/draining the
water tank”) .
˜
Cleaning and care
DANGER! Risk of electric shock!
Before
cleaning or maintaining the product: Disconnect
the power plug 9 from the power outlet .
m
WARNING!
Do not immerse the product’s
electrical components in water or other liquids .
Never hold the product under running water .
¾
Wipe down the product with a slightly damp
cloth .
¾
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product .
¾
Let all parts dry completely after cleaning .
˜
Descaling
¾
Use a commercially available descaling agent .
¾
Mix a solution of descaling agent and water .
Fill the solution up to the
MAX
marking 8 in
the water tank 6 . Insert the water tank into the
product .
¾
Let the solution work according to the instructions
of the descaling agent's manufacturer .
¾
Connect the power plug 9 to a suitable power
outlet .
¾
Wait until the product has reached its operating
temperature (the LED 1 lights up permanently) .
¾
Let the steam escape over a sink until no debris
or dirt is left .
¾
Disconnect the power plug 9 from the power
socket .
¾
Empty the water tank 6 . Rinse the water tank
with clear water .