54 GB/IE
If you have activated
Bluetooth
®
data transfer, the data will be
transferred after the measurement. The thermometer displays the
symbol for
Bluetooth
®
during transfer.
Note:
The “HealthForYou“ app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter ”transfer-
ring measured values“.
The device switches off automatically after 60 seconds, or press the
ON / OFF / MEASURE
button
8
for 5 seconds to switch it off.
Clean the device after every use as described in the chapter
”Cleaning and care“.
Measuring object temperatures
To switch on the multi-function thermometer, press the
ON / OFF /
MEASURE
button
8
for one second.
Then press the
M
button
9
and the
S
button
7
at the same time
for 3 seconds to change to the object temperature mode. appears
on the LCD display.
Point the sensor tip towards the object
3 cm
or the liquid to be measured (never
immerse in liquids!) at a distance of 3 cm
and press the
ON / OFF / MEASURE
button
8
for 1 second.
Release the
ON / OFF /
MEASURE
button
8
. The meas-
ured value appears on the display
and the end of measurement is indi-
cated with a short beep (when the
key tone is activated). The next
measurement is possible after
approx. 5 seconds.
Summary of Contents for 322247
Page 3: ...B A 2 3 1 5 4 6 7 8 9 20 22 21 11 13 14 15 16 17 19 18 10 12 ...
Page 4: ......
Page 122: ...122 ...
Page 152: ...152 ...
