Silvercrest 320214, Operating Instructions Manual

Page: 26 / 116

GB
│
IE
│ 23 ■ SKMK 1000 A1
Before first use
WARNING
► Hot steam escapes from the steam outlet openings
2
of the appliance lid!
There is a risk of scalding!
► Never open the appliance lid while brewing is in progress! Bursts of hot
steam may be released or hot water may spray out . There is a risk of
scalding!
► The hotplate
7
under the coffee pot
6
is heated strongly during the
brewing/keeping warm process . There is a risk of burns!
CAUTION – PROPERTY DAMAGE!
► Never fill the water tank
0
to more than the total amount required for
10 cups (MAX marking) .
► There is a small hole
3
on the back of the appliance . This is a water over-
flow that prevents too much water from being poured into the appliance . If
the water level exceeds the MAX mark, the water will escape through the
water overflow
3
onto the worktop .
► If the appliance is moved with a full water tank
0
(10 cups of water),
water may run out through the water overflow
3
.
► Never fill the water tank
0
with less than 2 cups of water . Use the fill level
indicator
4
on the water tank
0
for reference .
1) Place the appliance on a level and heat-resistant surface .
2) Rinse the coffee pot
6
thoroughly with water and place it in the appliance .
3) Open the appliance lid by pulling it upwards by the handle
1
.
4) Remove the filter basket
q
from the filter basket holder
9
.
5) Rinse the filter basket
q
in fresh water and replace it in the appliance .
6) Fill the water tank
0
with water for 10 cups .
7) Close the appliance lid .
8) Insert the plug into a mains power socket .
9) Press the button
5
. Wait a moment . The button
5
lights up .
The brewing process begins .
10) Wait until the brewing process is completed and press the button
5
again to turn off the appliance .