SDBS 2400 B2
GB
│
IE
│
35
■
Steam ironing
♦
Fill the water tank
with water if necessary.
♦
Insert the plug into a mains power socket.
♦
Set the On/Off switch
3
to the position "1" to switch the appliance on. The
integrated control lamp in the On/Off switch
3
and the heat-up indicator
lamp
light up, the "MAX" button
6
flashes.
♦
Turn the temperature control
to set the required ironing temperature. The
temperature control
must be set within the
range to produce steam.
♦
The heat-up indicator lamp
lights up during heating. As soon as the set
temperature has been reached, the heat-up indicator lamp
goes out.
♦
Adjust the steam power:
–
Press the "MAX" button
6
to create maximum steam.
–
Press the "ECO" button
0
to make the appliance produce less steam.
♦
As soon as the "MAX"
6
or "ECO" button
0
lights up continuously
(depending on the setting), you can start steam ironing.
♦
While you are ironing, you can now press and hold the steam button
to
continuously spray steam onto the items being ironed from the sole of the
iron
. Release the steam button
to stop producing steam.
NOTE
When you press the steam button
, it can take a few seconds until steam
comes out of the sole of the iron
.
♦
Put the iron down on the stand
on the base station
-
after ironing.
Set the temperature control
to "min".
♦
Set the On/Off switch
3
to the position "0" to switch the appliance off. The
integrated control lamp in the On/Off switch
3
and the steam control lamp
"MAX"
6
or "ECO"
0
go out.
♦
Pull the plug out of the mains socket.
Summary of Contents for 306479
Page 3: ...A B C ...
