10 GB
Incremental weighing
Touching the button / ZERO
3
with the product
on will change the numerical display
7
from the
reading to „
0
“. The „Tare“ symbol
9
will appear.
Now add another item to weigh onto the product.
The numerical display
7
will show the weight of
the newly added item.
If you remove the item added to the product, the
numerical display
7
will again read „
0
“.
If you remove all items from the product, the LC
display
2
will show a negative value indicated
by the minus symbol
10
.
Then briefly touch the button / ZERO
3
, and
the „Tare“ symbol
9
will disappear.
Important!
Be sure never to add more than 5 kg
to the weighing surface
1
. Overloading the product
can damage it.
Mode selection
The product has 3 different modes. One mode is used
to determine the weight. The other 2 modes are used
to determine the volume of water and milk.
Holding the button MODE
4
to entry mode se-
lecting function. The current mode indicator
8
,
11
,
12
will be flashing 3 times.
During mode selecting function, select the desired
mode by touching the button MODE
4
. After each
time it is touched, the mode indicator
8
,
11
,
12
will switch to the next mode listed:
„MODE weight“ → „MODE water“ →
„MODE milk“
After flashing 3 times without any movement, it will
exit the mode selecting function.
Changing the measuring unit
The product will display the weight in the official Euro-
pean measuring unit „g“ (grams), as well as the tradi-
tional unit of weight „oz“ (ounce, 1 oz ≈ 28.35 g) or
„lb’oz“ (pound: ounce, 1lb = 16 oz ≈ 453.59 g).
When measuring the volume of water, the product
calculates it by the weight using the official European
unit of volume „ml“ (millilitres) or the traditional unit of
measure fl’oz (fluid ounces, 1fl’oz ≈ 28.41 ml).
To switch the unit of measure, briefly touch the button
MODE
4
. After each time it is touched, the unit
display
6
will switch to the next unit listed:
For mode weight : g → oz → lb:oz
For mode water or milk : ml → fl’oz
Switching off
Holding the button / ZERO
3
for approx.
1-2 seconds will off the product. If no movement is
detected on the weighing surface
1
for 2 minute
and no button is pressed, the product will auto-
matically switch off.
Troubleshooting
=
Fault
= Cause
= Solution
=
= The product is overloaded.
= Remove the overload.
=
= The batteries are too weak to weigh. You cannot
operate the product.
