Silvercrest 304245, Operating Instructions And Safety Instructions

Page: 38 / 148

SilverCrest SHLF 2000 C1
36 - English
8.2 Setting the heat level
Every time you switch it on using the button (11) , the fan heater starts up in with low heat output
.
To select a heat function, proceed as follows:
Press the “ MODE ” (18) button until the operating mode you want is shown on the display (10):
(29)
Low power: The fan heater works at 900 W - 1000 W.
(30)
High power: The fan heater works at 1800 W - 2000 W.
(28)
Automatic mode: The heat output is automatically adjusted to the room
temperature (33).
(31)
Frost-guard function: The fan heater switches on when the room
temperature (33) is at 6°C.
Fan function: In fan mode, the fan heater works without heating. Above the
actual temperature, the display (10) shows small flashing dashes.
8.3 Setting the temperature in automatic mode
In “
Auto
” mode, you can define a target temperature in order to achieve a virtually constant
temperature in the room heated.
The setting of the target temperature (34) is important for the operation of the fan heater.
The fan heater switches off when the set target temperature (34) is reached.

Pressing the “ + ” button (12) increases the target temperature (34) to a value of maximum
38°C.

Pressing the “ - ” button (13) decreases the target temperature (34) to a value of minimum 6°C.
The target temperature (34) set is shown on the display (10). The current room temperature (33) is
also shown on the display (10).
As soon as the room temperature (33) reaches the set target temperature (34), the fan heater
automatically switches off.
The fan heater automatically switches back on again when the room temperature (33) falls below
the set target temperature (34).