16 GB/IE
Technical data
Rechargeable battery type: Lithium Polymer
Battery capacity:
3 .7 V, 1300 mAh
Output power:
5 W (RMS)
Bluetooth
®
version:
2 .1
Bluetooth device name:
SBLL 5 A1
Operation distance:
approx .10 m
Frequency response:
100 Hz to 20 kHz
Impedance:
4 Ω
Degree of protection:
IPX7 (protection
against the effects of
temporary immersion
in water for up to
30 minutes)
Charging time:
3 hours
Operation time:
5 hours
(at 70 % volume)
Frequency band:
2402 – 2480 MHz
Max . transmitted power:
10 dBm
The specification and design may be changed
without notification
Before use
NOTES:
All parts have to be unpacked and the
packaging material has to be removed
completely .
Before use, verify the package contents are
complete and undamaged!
Charging
This product is equipped with a built-in
rechargeable Lithium Polymer battery . Fully
charge the product before use .
Connect the micro-USB cable
13
with the
USB
charging jack
11
and the USB port of a PC or
a suitable USB charging power source .
The operating time for the product is 5 hours –
medium volume level (70 % volume) .
NOTES:
The red LED
6
lights up when charging and
goes out once charging is completed . The
charging time takes approx . 3 hours .
When the battery is low the voice prompt
says
“Battery low” every 5 minutes to prompt
charging . If the product does not get recharged
after 15 minutes, the product is switching off
and the voice prompt says
“Power off” .
Once charging is complete, disconnect the
micro-USB cable
13
from the power source .
Operation
Bluetooth connection
Switching on:
Press and hold
1
until the
blue LED
7
flashes . The voice prompt says
“Power on” . The blue LED
7
flashes slowly .
The voice prompt says
“Pairing . . .” . The blue
LED flashes
7
quickly . The product has
entered into pairing mode .
Activate Bluetooth
®
on your Bluetooth
®
device .
Search for the products’ Bluetooth
®
name
SBLL 5 A1
to enable pairing . When a
connection is established, the voice prompt
says
“Your device is connected” and the blue
LED
7
lights continuously .
Playing music:
Press
2
to play / pause
music .
Increasing/decreasing volume:
Press or
press and hold
+
4
or
–
3
.
NOTE:
A signal tone will sound when the maximum/
minimum vol ume level has been reached .
Switching off:
Press and hold
1
. The
voice prompt says “
Power off” .
NOTES:
The product automatically connects with
devices it has already been paired with before .
Once paired, the product automatically
switches off after 15 minutes if the product is
not playing .
When disconnecting the product after
pairing, the voice prompt says
“Your device
is disconnected” . The blue LED
7
flashes
quickly .
