SRR 3.7 E5
GB
│
IE
│
NI
│
17
■
–
First, put the shaving head
into the cutting unit
. The small
recesses on the edge of the shaving head
must lie over the
protrusions in the cutting unit
so that the shaving head
slides correctly into the cutting unit
.
–
Place the blade in the middle of the shaving head
.
–
Press the catches on the shaving head fixture together a little
and replace it in the cutting unit
. Ensure that the shaving
head fixture is engaged when you release the catches.
5) Remove loose hairs from the shaver with the brush
.
.
6) Replace the cutting unit
on the shaver. Ensure that it snaps
into place and is seated firmly.
■
Clean the housing and the mains adapter
!
with a moist cloth.
NOTE
If...
–
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly to
achieve a good result, ...
–
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads
, ...
... you must change the shaving heads
.
Please contact Customer Services if you want to order shaving
heads
.
Storage
■
Always replace the protective cap
0
onto the cutting unit
when you are not using the appliance.
■
Store the everything in a clean, dust-free and dry place.
Summary of Contents for 290485
Page 3: ...A ...
