Silvercrest 290359, Operating Instructions Manual

Page: 38 / 157

SDBS 2400 A1 GB
│
IE
│
35 ■
Steam ironing
1) Press the On/Off button
0
to turn the appliance on. The indicator lamp
integrated in the On/Off button 0 lights up and the “max” steam indicator
lamp 3 flashes.
2) Turn the temperature control to set the required ironing temperature. The
temperature control must be set to a minimum of to produce steam.
3) The heat-up indicator lamp lights up during heating. As soon as the heat-
up indicator lamp goes out, the set temperature has been reached.
4) Press the steam strength 6 button to set the required steam strength:
–
If the “max” steam indicator lamp
3
is lit up, a lot of steam will be
produced.
–
If the “eco” indicator lamp - is lit up, less steam will be produced.
As soon as the “eco” - or “max” 3 indicator lamps light up continuously
(depending on the setting) you can start steam ironing.
5) While you are ironing, you can now press and hold the steam button to
continuously spray steam onto the goods to be ironed from the sole of the
iron
. Release the steam button to stop producing steam.
NOTE
When you press the steam button , it can take a few seconds until steam is
issued from the sole of the iron .
6) Put the iron down on the base station placement area after ironing.
Set the temperature control to “min”.
7) Press the On/Off button
0
to turn the appliance off. The indicator lamp
integrated in the On/Off button 0 and the “eco” - or “max” 3 steam
indicator lamps (depending on setting) will go out.
8) Disconnect the plug from the mains socket.