Silvercrest 279915, Operating Instructions Manual, Page: 12 / 155

SNAW 1000 C1
GB │ 9 ■
Initial use
■ Remove all packaging materials from the appliance. Remove the protective
foil from the display
. The transport restraint that prevents the weighing
plate from being pushed down must be removed from under the weigh-
ing plate .
■ Open the battery compartment on the underside of the scales and remove
the small plastic strips which are clamped between the batteries and the
contacts. Close the battery compartment
afterwards, such that the battery
compartment cover audibly engages.
■ The scale can display weights in g (grams) / kg (kilograms) or oz (ounces)/
lb (pounds). You can set the unit on the rear of the appliance. Press the
unit switch
on the rear of the device to change units. In these operating
instructions, g (grams) is always the unit shown as an example.
Setup
Place the scales on a level and heat-resistent surface. A firm standing is the
prerequisite for correct measurement.
NOTICE
► This appliance is equipped with non-slip rubber feet. As furniture surfaces
may be made of a variety of materials and are treated with many different
types of cleaning agents, it cannot be completely ruled out that some
substances contain ingredients which may corrode the rubber rests and
soften them. If possible place an anti-slip material under the feet of the
appliance.
Operation
Weighing items
1) Press the button ON/OFF/TARE
to switch the scales on.
The start display appears briefly, then “0 g” appears automatically.
IMPORTANT
Overloading or improper loading lead to irreparable damage
to the appliance.
► NEVER place more than 5000 g (11 lb) on the weighing plate .
► Do not place objects or foodstuffs on the display or on the buttons.