SFKS 2 B1
GB
│
IE
│
NI
│
15
■
If the synchronisation has been a success, the
receiver notifi es you of the programmed call signal.
Should the receiver not react as described, repeat the
synchronisation.
Mounting the transmitter
♦
Select a suitable positioning for the sender, close
to your outer door.
♦
Mark the positions for the required drill holes
with the help of the mounting plate
q
and drill
the holes for the supplied wall plugs
r
(6 mm
drill).
♦
Push the wall plugs into the drill holes and screw
the mounting plate
q
onto the wall using the
screws
t
.
♦
Push the transmitter onto the mounting plate
q
until it clicks audibly into place.
NOTE
►
Alternatively, you can mount the transmitter
onto a suitable surface using the double-sided
adhesive tape
w
.
♦
Label one of the supplied name plates
e
. If you
label the name plate by hand, make sure you
use a waterproof pen.
IB_279882_SFKS2B1_LB6-.indb 15
29.08.16 14:41
Summary of Contents for 279882
Page 3: ...A C B 5x 2x 2x ...