Silvercrest 274143, Operating Instructions Manual

Page: 13 / 74

GB
│ 9 ■
SLB 1.2 C2
Fault rectification
This section contains important information on fault localisation and
rectification . Observe the instructions in order to avoid risks and
damage .
Malfunction causes and remedies
CAUTION
The loudspeakers may not be opened!
► There are no parts which can be cleaned or maintained inside
the device . Opening the loudspeakers will result in irreparable
damage to the device .
The following table will help with localising and remedying minor
malfunctions:
Defect Possible cause Rectification
No sound .
The volume control of
the player or the loud-
speaker
6
is set to
the minimum volume .
Increase the volume
at the audio device or
the loudspeaker
6
.
The audio device has
been muted .
Switch the audio
device muting off
again .
Audio device or
loudspeaker
6
not
switched on .
Ensure that all devices
are switched on .
The 3 .5 mm jack plug
8
is not fully inserted
into the audio device's
headphone socket .
Insert the 3 .5 mm
jack plug
8
fully
into the socket .
The 3 .5 mm jack plug
of the headphones
is connected to the
headphone socket
5
.
Pull the 3 .5 mm jack
plug of the head-
phones out of the
headphone socket
5
.
No sound or
volume too low
on connected
headphones .
The volume control
of the audio device
is set to the minimum
volume .
Increase the volume
at the audio device .
Headphones defective .
Check the head-
phone function on the
audio device itself .