SilverCrest SIKP 2000 D1
English - 17
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
Switching off using the timer
You can program the timer to switch the hotplate off automatically after a preset time.
1.
Press the sensor button for the timer
(9) when cooking with the hotplate to program the timer.
2.
Use the rotary controller (11) to set the cooking time you want (hours:minutes) before the hotplate is
to switch off.
You can program the cooking time to between 00:00 to 3:00 hours.
The time set flashes briefly and then the remaining time (countdown) is shown on the display (7).
If the timer is activated, the indicator (4) lights up and alternates showing the power or temperature and
the remaining time at around 5 second intervals.
If necessary, you can adjust the power or temperature using the rotary controller (11).
Once the countdown reaches zero, the hotplate automatically switches off. A beeper sounds.
In order to switch the hotplate off manually before the time has elapsed, press the On/Off
button
(10).
Child lock
The induction hotplate has a child lock so that the settings cannot be changed accidentally.
How to activate or deactivate the child lock:
1.
Press the
button (8) once. An acoustic signal can be heard and the indicator (3) lights up. The
child lock is now activated.
2.
Press and hold the
button (8) for 3 seconds. An acoustic signal can be heard and the indicator
(3) light goes out. The child lock is now deactivated again. You can use the hotplate as normal.
You can also activate the child lock when the induction hotplate is switched off.
Summary of Contents for 273185
Page 1: ......
Page 2: ......
Page 3: ...English 2 Ελληνικά 23 Deutsch 47 V 1 2 ...
