Silvercrest 103906, Operating Instructions Manual

Page: 17 / 156

15 GB
7. Cleaning and care
DANGER! Risk of electric shock!
Unplug the power unit 9 from the wall socket before cleaning
the hair and beard trimmer 5 and the battery charger 10 .
WARNING! Risk of injury!
Always switch the hair and beard trimmer 5 off before clean-
ing.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer 5 and battery charger 10
• Wipe the casing of the hair and beard trimmer and the
battery charger with a damp cloth.
Comb attachments 2 , 1
• Remove the comb attachment. Rinse the comb attachment
with water and let it dry before using it again.
Hair trimmer, beard trimmer and precision trimmer
attachments
12 , 13 , 4
1. Figure A: remove the attachment from the hair and beard
trimmer 5 by pressing it with the thumb towards the rear.
2. Remove the hair remnants from the attachment using the
cleaning brush 16 included in the delivery.
3. Apply a few drops of blade oil 15 to the cutting edge of
the attachment. Using a soft cloth, wipe off the surplus oil,
if necessary. Only use acid-free oil, such as e.g. sewing
machine oil.
Nose/ear hair trimmer attachment 11
• Remove the nose/ear hair trimmer attachment 11 . Rinse it
with water and let it dry completely before using it again.
BB.5$B%ERRN6HLWH0LWWZRFK'H]HPEHU