2
Configuration:
Display symbols:
Taking a measurement:
BODY
Forehead measuring mode
Ambient measuring mode
Centigrade
Fahrenheit
Low battery
Memory
Alarm beep signal
M
SURFACE TEMP
ú
Install battery
ú
For the first use or when inserting new batteries, wait
10 minutes for the warming-up of the device.
ú
Aim towards the forehead as the picture shows, from
a distance of 5~10cm, press the scan button and
measured data will be immediately displayed on the
LCD. Make sure there is no air perspiration, cosmetic
or cap covered on forehead. When there is sweat on
forehead you can measure behind the ear lobe
making sure no hair, sweater or other things cover the
ear.
ú
Memory recall: Press “M” button to consult measured
result
ú
Battery replacement: When LCD shows low battery
symbol it means you must install new batteries.
Remove the battery compartment cover and put 2AA
(1.5 volt) batteries (alkaline batteries) paying attention
to the polarity.