background image

1

2L-6634-00

Do not tighten hardware until instructed to do so.

 If hardware is tightened too soon, mounting holes may not align and parts

may not fit together.

 

Leave locknuts slightly loose until you are instructed to tighten them.

Read this manual all the way through before starting to put up your pole. Then read each step completely before beginning that step. 

Some smaller parts

may be shipped inside larger tubes. Check inside tubes before assembling or ordering parts.

OWNER'S

OWNER'S

OWNER'S

OWNER'S

OWNER'S

MANU

MANU

MANU

MANU

MANUAL

AL

AL

AL

AL

WARNING

FAILURE TO FOLLOW THESE

WARNINGS MAY RESULT IN

SERIOUS INJURY AND/OR

PROPERTY DAMAGE.

Owner must ensure that all

players know and follow these

rules for safe operation of the

unit.

!

Do not dunk on this unit

!

Do not hang from any part of the unit,
including the backboard, rim, or net.

!

Do not slide, climb, or play on pole.

!

Keep organic material away from
pole base. Grass, litter, etc. could
cause corrosion and /or deterioration.

!

Check pole system twice a year for
signs of corrosion (rust, pitting,
chipping). Remove rust and/or loose
paint completely and repaint with
exterior enamel paint. If rust has
penetrated through the steel
anywhere, replace pole immediately.

!

Check unit before each use for loose
hardware, excessive wear, and signs
of corrosion and repair before using.

!

During play, use extreme caution to
keep players face away from the
backboard, rim, and net.

!

Wear a mouthguard when playing to
avoid dental injuries.

!

When adjusting height, keep hands
and fingers away from moving parts.

!

During play, do not wear jewelry
(rings, watches, necklaces, etc.).
Objects may entangle in net.

To make assembly of your basketball pole easier, use the Hardware Identifier on page 2 and 3 to identify and sort all fasteners.

BASKETBALL SYSTEM

BASKETBALL SYSTEM

BASKETBALL SYSTEM

BASKETBALL SYSTEM

BASKETBALL SYSTEM

MODEL NUMBER

B2312

Thank you for purchasing our basketball system. We try hard to ensure that our products are of high quality

and free of manufacturing defects and of missing parts. However, if you have any problems with your

basketball pole, such as a manufacturing defect or a missing part, please 

DO NOT RETURN IT TO THE

STORE.  

Call us at:

TOLL FREE 1-888-USA-GOAL

(THIS IS A CONSUMER ONLY NUMBER)

FAX: (812) 467-1399

Or write us at:

CUSTOMER SERVICE DEPT., P.O. Box 889, Evansville, IN 47706

Please provide model number, serial number, and/or part number of the product and/or part when you call or

write. These numbers can be found on the product, packaging, or in this owner's manual.

Model I

Summary of Contents for B2312











Reviews: