Drill out holes for the inner cabane struts (parts IX, X, XI and XII) in the forward fuselage (see
photo 35
) and
test fit the inner cabane struts using the clear wing template. I found I had to bend/push mine a bit to get
them into the correct position.
Test fit the inner interplane struts (parts III, IV, V, and VI) using the upper wing template to align them
properly.
When satisfied with the fit, glue the inner cabane and inner interplane struts in position, again keeping the
clear template in place to hold the upper ends in position
. It should look like photos 36-38
. Note that the
