Instruction Manual for Motorized, Recessed In-Ceiling Screens
Installation Instructions
1. Slide four M5 screws (two along each track) onto the screen case (
Fig. 1
). Place the first
screen bracket on the screen case aligned with the four screws (
Fig. 2
). Slide the bracket so
that there is no gap between the bracket and the end of the screen case. Secure the bracket
with a nut on each screw (
Fig. 3
). Repeat this step for the second bracket on the other end.
2. Slide the threaded installation rods through the holes in the each ceiling-mount bracket and
secure each rod on both sides with nuts until the ceiling-mount brackets are secure (
Fig. 4
).
Install the ceiling brackets (
Fig. 5
) at the previously marked locations (
see Preparation
Instructions
).
3. Be sure that the screen case is facing the correct direction. The screen controls should be
on the left side of the case when looking at the viewing side of the screen. Lift the screen
up so that the threaded hanging rods slide into the holes in the case mounting brackets
(
Fig. 6
). Secure the screen in place with nuts threaded onto the hanging rods (
Fig. 6,7
).
4
