36948-EN
5
Printed in USA 10/13 © 2013
3-Product Dairy Dispenser
Model SKBD3LS
P
RINCE
C
ASTLE
LLC
W O R L D W I D E
Installation
To avoid injury, it is recommended that the unit be moved
by two people.
WARNING
Locate the unit.
Move the unit to its mounting location.
1
Install the four legs underneath the unit.
2
Remove the plastic film.
Remove the plastic
protective film from the stainless steel surfaces and
wipe all the surfaces with a mild soap-and-water
solution.
3
Level the unit.
In order for the unit to function properly,
level the unit front to back and side to side.
4
Install the display
cable.
Install the door-
display connector
cable (8-inch black
cable) and hand
tighten the threaded
connectors.
Door-Display Connector Cable
5
Install the drip tray and the cup guide.
Hang the drip
tray on the bottom two screws on the front apron of the
unit. Slide the cup guide into position and secure it on
the upper two screws.
Drip Tray and Cup Guide
Cup Guide
Drip Tray
Mount
Drip Tray
Mount
6
Connect the unit to
power.
Plug in the
power cord on the
bottom of the unit, at
the right rear. Run
the cord along the
rear of the shelf and
plug it into the
designated outlet.
NOTE: Do not turn
on the power switch
at this time.
The power cord comes with a 3-prong plug for
grounding purposes. Any attempt to cut off this
grounding spike or to connect to an ungrounded
adapter plug could result in serious injury, will
void the warranty and terminate the
manufacturer’s responsibility.
NOTE: After installation and assembly and before the
unit goes into service, it must be 1. Cleaned and
sanitized; 2. Loaded with product; and 3. Calibrated.
AC Power Cord Connection
WARNING
7
