15
silvercrossbaby.com
USE OF BEDSIDE MODE
ATTACHMENT SYSTEM
1. Open the zip at the sides of the
dropside of the cradle.
2. Press the button to release
the dropside and lift to release.
Repeat the operation on both
sides.
3. In the bedside mode, the cradle
must be positioned so that there
is never any space between the
lower side of the cradle and the
mattress of the adult bed. Line
the cradle up with the adult bed.
4. Adjust the height of the cradle
compared with the adult bed. The
top of the side must be at least 1
cm lower than the height of the
mattress of the adult bed.
5. Fasten the belts to the buckle
located under the cradle. Repeat
the operation on both sides.
6. Pass the belts around the frame
of the adult bed from the bottom
upwards. Repeat the operation
on both sides. OR Pass the belts
around the base of the bed from
bottom upwards. Repeat the
operation on both sides.
7. Fasten the buckle so that a loop
is formed. Repeat the operation
on both sides.
8. Move the cradle as close as
possible to the adult bed and
pull the belts hard. Repeat the
operation on both sides.
MAINTENANCE.
To clean the cradle use warm water
and soap. Do not use solvents or
derivatives. Dry the metal parts
to prevent the formation of rust.
Wash the cover by hand in warm
water (max. 30° C) using low-duty
detergents for delicate fabrics. Do
not bleach. Do not use driers. Do
not dry clean. Do not iron. Dry flat
in the shade.
IM-RXB-201005-01r10 - SX Voyager Instructions.indd 15
IM-RXB-201005-01r10 - SX Voyager Instructions.indd 15
17/03/2021 15:07
17/03/2021 15:07
