Fitting and removing
your child (cont)
Removing your child from
the Ventura Plus
11
To remove your child from the
Ventura Plus, slacken the shoulder
straps by pressing the harness
release button (
A
) and pull both
shoulder straps with your other
hand (
B
)
Unfasten the harness by pressing
the red buckle release button (
C
)
and place the shoulder straps over
the side of the seat
11
12
A
B
C
Lap Section
D
iag
onal
S
ec
tion
14
A
13
Installing and removing
the Ventura Plus
Using a lap and diagnonal
seat belt
*Do not fit the Ventura Plus
on a passenger seat fitted
with an airbag!
12
The Ventura Plus must always be
fitted rearward facing with your
child facing the back of the car.
13
The Ventura Plus must always be
fitted using a lap and diagonal
seat belt
NOTE:
If fitting the Ventura Plus in
the front seat
*
, adjust the vehicle
seat as far back as possible. If you
have a short seat belt, check if it is
height adjustable and place in the
lowest position. This will also help
if you have a short seat belt.
14
Place the Ventura Plus on the
vehicle seat with your baby facing
the back of the car.
Position the handle to the in-car
position (
A
) making sure that it
clicks into position.
10
11
SX VENTURA PLUS layout small.indd 10-11
22/7/08 10:00:24
