Silvan Selecta Selecta MANSECURE01 Instruction Manual Download Page 2

Silvan Warranty 

 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and 
the failure does not amount to a major failure.

 

We warrant our goods to be free from defects in materials and workmanship for the warranty period of 12 months from the 
date the product is delivered to the consumer.

 

Silvan warrants its authorised Dealer, who in turn warrants the original purchaser (consumer) of each new Silvan product that 
it  will  repair  or  replace  the  product,  or,  pay  the  cost  of  repair  or  replacement,  as  determined  by  Silvan  without  charge  for 
labour or any defective or malfunctioning parts in accordance with the warranty limitations below. 
This Warranty is in addition to any other rights and remedies available to consumers under the law 

This Warranty Covers

 

Only conditions resulting directly from defects in workmanship or material under normal use and service. 

Warranty Exclusions

 

The Warranty does not cover: 
 

 

Conditions  resulting  from  misuse,  use  of  incompatible  chemicals,  exceeding  machine  specifications  including 
overloading,  impact  damage,  negligence,  accidental  damage  or  failure  to  perform  recommended  maintenance 
services as specified in the Owner/Operator Manual applicable to the product. 

 

Damage caused by continued use of a product after initial failure 

 

Any product which has been repaired by other than an authorised Silvan service outlet in a way which, in the sole and 
absolute judgment of Silvan, adversely affect its performance or reliability. 

 

The replacement of maintenance items such as diaphragms, batteries, V belts and ground engaging components, etc. 

 

How to claim Warranty 
 

Return the goods to the place of purchase at your cost and within the warranty period along with evidence of the purchase 
date. If the original supplier cannot be contacted then contact Silvan as below and we can direct you on how to proceed with 
your warranty claim.  
 

How your claim will be managed 
 

The  repair  of  a  defective  product  qualifying  under  this  warranty  will  be  performed  by  any  authorised  Silvan  service  outlet 
within  a  reasonable  time  following  the  delivery  of  the  product,  at  the  cost  of  the  owner,  to  the  service  outlet’s  place  of 
business.  The product will be repaired or replaced depending on the extent of the problem at the discretion of Silvan and the 
Silvan dealer.  
 
 
Silvan Australia Pty Ltd 
264 -266 Greens Rd  
Dandenong Sth 
Victoria 

3164 

1300 SILVAN (745 826) 
[email protected] 

New Product Warranty 

Summary of Contents for Selecta MANSECURE01










Reviews: