The camera provides the following connections for external devices: USB port, SD card slot, TV out
jack, and external DC power in jack. The 3-way Power/Mode Switch is used to select the main
operation modes:
OFF
,
ON
and
TEST
(Also called
SET
).
If you are not familiar with the operation of this camera, the following instructions will help you get
a quick overview. Before doing any operation, please make sure you have loaded batteries and
plugged the SD card correctly. If the SD card is not inserted correctly or its write-protect is enabled,
the device will give you a long beep and turn off automatically.
2.1 Load Batteries:
To install batteries on the camera, please follow the instructions below.
1) Unlock the two buckles and open the camera, the right part is battery box.
2) Open the battery cover and load 4 / 8 / 12 pieces batteries.
To supply power, it is recommended to use new high-performance alkaline AA batteries, low self-
discharge Ni-MH or Lithium rechargeable AA batteries with a high mAh rating.
CAUTION:
If you are not using the camera for an extended period of time, it is highly recommended
that you remove the batteries from the camera to avoid possible acid leak that may damage the
camera which would void the warranty.
Alternatively, the camera can run on an external 6V DC power source (optional, user provided).
When both external power and batteries are connected, the camera will be powered by the external
one.
2.2 Insert SD Card:
The camera does not come with internal memory. So, it will not work without a SD (Secure Digital)
memory card or SDHC (High Capacity) card. Before inserting the SD card into the card slot, please
make sure the write-
protect switch on the side of the SD card is “off” (NOT in the “Lock” position).
The supported memory capacity is up to 16GB. If you use a card capable of above 32GB, make sure
you test it before putting the camera in use. Because of the HD720P video resolution, SDHC card
are recommended.
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE INSTALLING OR
REMOVING THE BATTERIES OR THE SD CARD.
General Information (cont.)
Quick Start
