DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.
Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: [email protected]
www.danlers.co.uk
Company Registered Number 2570169 VAT Registration Number 543 5491 38
11/10/19
INS378 MESH-HBWD (Issue 03)
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT
NOTE: MESH-
HBWD
is compatible with any qualifi ed Bluetooth mesh components and commissioning tools.
We recommend Silvair Commissioning as a reliable solution.
MESH-HBWD
Ceiling High Bay (Wide) Passive Infra Red
(PIR) Occupancy Detector & Photocell
Input: 100-240 Vac 50/60Hz
STATUS LED BLINKING SEQUENCE:
MESH-HBWD Unprovisioned:
30ms ON
300ms OFF
MESH-HBWD Provisioned:
15ms ON
2000ms OFF
Factory Reset:
500ms ON
1000ms OFF
Factory Reset (initial burst):
100ms ON
1000ms OFF
MESH package received:
30ms ON
50ms OFF
Attention (from network):
500ms ON
500ms OFF
HALL EFFECT / FACTORY RESET:
This function allows a reset to be carried out in order to restore the default
factory settings.
A factory reset will change the state of MESH-HBWD from ‘provisioned’
to ‘unprovisioned’, i.e. all network settings will be lost. This functionality is
required to allow reprovisioning MESH-HBWD where control over the device
is not functioning correctly.
TO REPROVISION:
Place a small magnet on the site of the Reset / Hall effect sensor (see
diagram 4 below). To trigger the reset the magnet must be held in position
for 5 seconds.
DIMENSIONS
DIAGRAM 3
plan
side
63
90
90
76
RESET ZONE
(behind moulding). Magnet
to be placed over the Reset
Sticker for reprovisioning.
RESET ZONE GUIDE
Small black circle ( • )
indicates reset
zone position
STATUS LED.
Flashes rapidly
when unprovisioned.
Flashes slowly
when provisioned.
DIAGRAM 4
