background image

Storage/Maintenance

Store the instrument at room temperature. Never expose 

the instrument to temperatures exceeding 50°C as this could 

damage the compass capsule. If the instrument has been 

exposed to extreme moisture, check that the moisture has 

not penetrated the battery compartment.

If the instrument is to be stored for a long period of time, 

remove the batteries to avoid the risk of battery leakage.

Avoid storing LaserMaster™ in the proximity of strong 

magnetic fi elds, such as speakers, permanent magnets and 

the like. 

Service/Repairs

LaserMaster™ is normally service and maintenance-free. 

Contact your local Silva representative in the event of 

malfunction.

Battery replacement

Open the battery cover on the left-hand side of the instrument 

by turning it counterclockwise.

Remove the batteries and replace them with 3 fresh ones of 

type SR44. Make sure that the positive pole of the battery 

(+) points out (towards the battery cover). Close the cover by 

turning it clockwise. If the batteries are fi tted in the wrong 

direction, the laser unit will not light but will also remain 

undamaged. 

Technical data

Instrument housing: Aluminium

Sighting system: lens sighting with 2x enlargement

Graduation: 360° actual course and contra-course

Compass accuracy: Better than +/- 0.25 degrees from actual 

magnetic course.

Laser: Class 2 (no permit required). Wavelength 650 nm. 

Voltage 4.5 Volt. 

Output <1mW.

Batteries: 3 SR44 (included) 

Weight: 300 g

Dimensions: 170 x 53 x 16 mm

Laser CE-approved: DC91107 in accordance with test standard 

EN60950, 

EN60825-1

IMPORTANT!

Information on the laser unit in LaserMaster™ 

• Do not attempt to remove the laser unit at the front of the 

instrument on your own! 

• The built-in laser unit contains a class 2 laser. 

• Never look into the laser beam – this could cause 

permanent eye injury!

• When demarcating boundaries, make sure that your 

assistant wearing the refl ective vest always walks with 

his/her back towards LaserMaster™!

Warning! Any attempt to modify/manipulate the laser unit 

or use of LaserMaster™ for purposes other than which it is 

intended could lead to laser radiation injury!

Warranty

• The product has a 2-year warranty for material and 

manufacturing defects.

• Improper handling, attempts at modifi cation or the like 

invalidate the warranty.

• The warranty does not cover any damage caused by a third 

party or other equipment. 

• In the event of malfunction, contact your nearest Silva 

retailer.

Additional advice and tips

Visit our website www.silva.se and click Outdoor/Products/

Professional Instruments for additional advice and tips on the 

use of your SILVA LaserMaster™.

Silva Sweden AB

Box 998

S-191 29  Sollentuna

Sweden

[email protected]

www.silva.se

Accompanying accessories

Course protractor - Part no. 67030

Refl ective vest - Part no. 70743

Instrument case- Part no. 70742

Extra accessories

Monopod (non-magnetic single leg stand) - Part no. 71575-10

Course protractor 

Part no. 67030

Refl ective vest 

Part no. 70743

Summary of Contents for LaserMaster

Page 1: ... boundary stones while walking in the precise direction The rear person concentrates on guiding the front person with the help of the laser dot on the large reflective surface of the vest The method is simple quick and highly effective Instrument usage LaserMaster should be held horizontal when used When using the sight for aiming it is often simplest to use both eyes one eye looking through the s...

Page 2: ... NOTE Select a scale based on in which direction the boundary extends If it goes in a southeast direction use the scale marked SO If it goes in a northeast direction use the scale marked NO etc 5 Note the desired boundary bearing 6 Magnetic declination which is normally specified on the map must be taken into consideration to ensure bearings are accurately obtained If no declination is specified t...

Page 3: ...came to check the compass direction along which the boundary runs This is read from the small scale in the instrument sight If this value differs from the measured value and if the map indicates the boundary should be straight it is probably the most recently read compass bearing that is correct and should be used when continuing the search for more boundary markers Do as follows to move a boundar...

Page 4: ...Voltage 4 5 Volt Output 1mW Batteries 3 SR44 included Weight 300 g Dimensions 170 x 53 x 16 mm Laser CE approved DC91107 in accordance with test standard EN60950 EN60825 1 IMPORTANT Information on the laser unit in LaserMaster Do not attempt to remove the laser unit at the front of the instrument on your own The built in laser unit contains a class 2 laser Never look into the laser beam this could...

Reviews:

Related manuals for LaserMaster